3.2 Turning the power ON/OFF
This section explains how to turn ON/OFF the printer.
3.2.1 Turning the power ON
Follow the procedure below to turn ON the printer.
| 1 | Press the [Power] key on the operation panel to turn ON the printer.
| • | The Power lamp on the operation panel lights up in green. |
| • | The printer starts initial operation. |
| • | When the initial operation is complete, the printer enters normal status. |
 |
| • | If there is a problem during initial operation, the printer displays a message on the operation panel and may stop operating.
In the case operation stops, refer to "7 Troubleshooting" and deal with the problem. | |
|
3.2.2 Turning the power OFF
Follow the procedure below to turn OFF the printer.
| 1 | Regarding the operating condition of the printer, confirm the following.
| • | Printing or other operations are not performed. |
| • | Make sure that the display on the operation panel shows the normal state. | |
| 2 | Press the [Power] key on the operation panel to turn OFF the printer.
| • | The Power lamp on the operation panel turns off. |
|
| • | If the operation panel is in the following status, the power is ON. |
|
| • | The [Power] key is pressed in. |
| • | The [Power] lamp lights up in green. |
|
|
| Press the key once again and turn OFF the power. |
| |
| • | The printer starts operation to turn the power OFF. |
| • | "Power Off" is displayed on the operation panel. |
| • | All the lamps on the operation panel and the LCD monitor are turned off. |
| • | The printer automatically turns the power OFF. |
|
| • | If there is a problem during turning OFF operation, the printer displays a message on the operation panel and may stop operating.
In the case operation stops, refer to "7 Troubleshooting" and deal with the problem. |
| • | After turning OFF the printer, wait for 10 seconds or longer to turn it ON again. | |
|
| 3 | When not using the printer for a long period, push the media loading lever to the back.
|
