4.1 Print flow chart

The necessary procedures for operating this printer is shown in the following flow chart.
Refer to each section if necessary.
          1. Create print data.
          Create print data with application software.
↓
          2. Turn the power ON and set the media.
          graphics/NZILG007.gif3.4 Media handling
          graphics/NZILG007.gif4.2 Media
↓
          3. Printing setup conditions.
          graphics/NZILG007.gif4.3 Menu setup on the operation panel
↓
          4.Perform the printing.
          graphics/NZILG007.gif4.4 Operating from the operation panel
•Do not store combustible materials on Platen while performing the heater operation. It could lead to fire.
•Do not spill flammable liquid over platen. This could lead to fire.
•Do not touch the media guide during printing. It is hot and may cause a burn.
•Do not touch the media feed slot, platen or media guide while heaters are operating. They are hot and may cause a burn.
•Keep the work area well-ventilated. This prevents fire and operators from feeling sick from bad air.
•Do not open the front cover during printing. If the front cover is opened, printing will be interrupted.
Printing restarts if you close the front cover. However, you are not guaranteed to have high printing quality.