The type and quality of media greatly influence the print result. Use media that matches the application, taking the following information into account.
Various recommended media are prepared for this printer as follows. Select the appropriate media according to the usage.

Note the following points when handling the media.

• Use recommended media under an appropriate environment. The appropriate temperature and humidity for printing are as follows. • Do not use media which is folded, cut, or torn. • The size of media can change at a constant rate according to the change of humidity in the printing environment. Before using media, leave media for 30 minutes in the printing environment to adapt it to the environment. Performing printing without adapting media to the printing environment, media jams may occur due to gaps or wrinkles in the media. Printing quality is also affected. • Do not touch the print side. Moisture and oil on your hands may affect the printing quality. • Do not leave media for a long time with media set. Some media has a tendency to roll which may cause media to float, media jams, and degradation of printing quality. Avoid using such media especially in winter, dryness and when printing formal documents. • Do not lose the individual box and bag. Use them for storing media.

Note the following points on storing media.

• Avoid high temperature, high humidity, and direct sunlight to store media. • After removing the unused roll media from the scroller, wind it properly. Then wrap it with an individual bag and store it in an individual box. • Keep the media dry.

The printable area of this printer is as follows.

Printing with high printing rate or using strongly-curved media can cause a head rub.
Changing the head height may allow you to avoid the head rub.
Follow the procedure below to change the head height.

This section explains the Media feed compensation.

A feeding length depends on media types. The following or similar results may be seen in prints.