4.3.1 Menu setup procedure

According to the following procedure, configure each setup menu.

1	Check that the operation panel is Normal.

Press the [Menu] key on the operation panel.

•	The operation panel displays "Menu 1: Setup>".
•	Shift to the Setup menu display.

Press the [+] key or [–] key on the operation panel to select a setup item and press the [Enter] key.

•	The settings will be confirmed.
•	For setup items that have a submenu, the display enters the next menu hierarchy.

•	When a setup item has a submenu, [>] is displayed on the right end of the LCD monitor of the operation panel.
•	For the general outline of each setup item, refer to "4.3.2 Panel setup menu overview ".

The setting for the blinking part on the LCD monitor of the operation panel can be changed.
Press the [+] key or [–] key to change the setting.

To save the changed setting, press the [Enter] key on the operation panel.

•	The setting will be saved and the next setup item will be displayed.

•	After having changed the setting, pressing the [Cancel] key, [+] key or [–] key is pressed without pressing [Enter] key will not save the changed setting.

Press the [Cancel] key on the operation panel to exit from the setup.

•	The previous setup menu will be displayed.
•	When the main menu is displayed, the screen turns to Normal.

4.3.2 Panel setup menu overview

This sub-section explains the Panel setup menu of the printer.
There are following items in the Panel setup menu.

Setup item

Description

Setup menu

Perform various setup of printer.

Test Print menu

Perform the nozzle check of the print head and setup list.

Adjust Print menu

Print and adjust test patterns for Alignment.

Cleaning menu

Perform head cleaning.

Selection menu

Set up the contents of the Setup menu.

•	For details of each setup item, refer to "5 Panel setup menu ".